091/23

60.

61.

62.

63.

64.

65.

66.

67.

Conventional cranes are used for drop weights of up to and drop height below
A) 20 tons and below 100 ft B) 30 tons and below 100 ft
C) 40 tons and below 75 ft D) 50 tons and below 75 ft

The sound of a periodic clunck indicates
A) Broken gear teeth B) Broken clutch
C) Defective synchronizer D) Broken bearing

The maximum pressure that a power steering pump can produce is
A) 2500 psi B) 2000 psi
C) 1500 psi D) 1000 psi

The purpose of a front stabilizer bar is

A) Provide a smooth ride

B) Increase load carrying capacity

C) Stiffens the suspension to control body roll
)

D) Prevent sideward movement

Lubrication of shackle pins are done with
A) SAE 40 B) SAE 90 C) SAE 140 D) SAE 250

If thrust angle is not zero

A) The vehicle will dog track
B)

C) All four wheel should be parallel to the frame
D)

Rear wheels follow front wheel

None of the above

In a master cylinder when the brakes are not applied, fluid flows through
ports to fill the high pressure chamber ahead of each piston

A) Replenishing port B) Vent port

C) Both A andB D) None of the above

Longitudinal torsion occurs on the frame due to

A) Sudden impact loads due to collision

B) Engine torque and braking torque

C) Load due to wheel impact

D) Vertical loads when vehicle come across a hump or hallow

-10-