116/23

38.

39.

40.

41.

42.

43.

44.

45.

The purpose of this test is to assess the plasticity of lime
A) Impurity test B) Workability test
C) Plasticity test D) Ball test

In a mortar, the binding material is
A) Sand B) Cement
C) Surkhi D) Clay

The sand particles which sand pass through 1.5875 mm is sieves are known as
A) Coarse sand B) Gravelly sand
C) Mud sand D) Fine sand

Grass or air bubbles are introduced into the plastic-cement mortar mix to produce a
material with a cellular structure

A) Cellular concrete B) Light weight concrete

C) No fines concrete D) Heavy weight concrete

Hot rolled deforming bars conforming to 1.5. ೦೦೮೮
A) 1139 B) 1785
C) 1566 D) 226

These piles are driven at an inclination to resist larger horizontal or inclined forces
A) Sheet piles B) Anchor piles
C) Fender piles D) Batter piles

Minimum height 50 mm only three stones are to be used to make up the height of
one course, mortar joint is 16 mm

A) Coursed rubble (19 sort) B) Coursed rubble (2" sort)
C) Coursed rubble (3 sort) D) Coursed rubble (4"" sort)

It prevent the tendency of stone joint to pull apart. This joint is used instead of dowel
joint.

A) Cramped joint B) Plugged joint
C) Butt joint D) Dowelled joint