88.

89.

90.

91.

92.

93.

94.

The drive shafts are connected to the differential and wheel hubs through universal joints
because the universal joints :
(A) absorb the vibrations transferred from the surface of the road
(B) compensate for variations in the relative positions of the differential and the
wheels which result from bumpy road surfaces or other similar driving conditions
(C) absorb any difference in speed between the left and right wheels when the vehicle
is turning
(1) none of the above

Which of the following statements are correct for all-wheel drive systems?
டு suitable for SUVs and crossovers driven on varying road conditions
(ii) _ suitable for off-road SUVs with very low traction
(iii) sends power to the front and rear wheels all the time
(A) _ only (i) and (ii) (B) | only (ii) and (iii)
(೮) _ only (i) and (iii) (D) all the above (i), (ii) and (iii)

Sound occured due to the splines on the axle shafts being worn out is called as:
(A) Humming noise (B) Knocking noise
(C) Noise when accelerating (D) Noise when turning

Brake torque on the front wheels is absorbed by the :

(A) nuckle and suspension control arm

(B) axle housing and control arm

(C) axle housing and the leaf spring

(D)_ brake drum and suspension control arm

The shoes that provide self-energizing or servo action are known as:
(0) Trailing shoes (B) Leading shoes
(C) Brake shoes (D) None of the above

During the application of disc brakes, the reduction of speed is :

(A) irectly proportional to the vehicle weight

(B) inversely proportional to the vehicle weight

(C) irectly proportional to the hydraulic pressure acting on each piston
(D) inversely proportional to the hydraulic pressure acting on each piston

The common cause of the car pulling to one side under braking is :
൫) a fault with the pad or caliper
(ii) the brake on one side is grabbing
(111) the brake fluid pressure is low
(A) Option (i) and (ii) (B) Option (ii) and (iii)
(೮) Option (i) and (ii) ൯) All the above options (i), (ii) and (iii)

13 195/2023
[P.T.0.]